Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They do not decay or rust as timber and aluminum.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace them, and the new window will usually fit inside the frame that was previously installed easily. If you have double-paned windows repairs which are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance you'll need to source some plastic spacers to help the new pane to fit correctly into the window frame.

If you are going attempt to remove the window panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any shards will fall onto the cloth rather than on the floor where they could be trodden under and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will stop drafts and water from getting into your property until a professional comes out to fix the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap between the window and the door is significant, you may need to consider an alarm system that has a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. As time passes, they may develop a number of problems that include sagging. A sagging uPVC windows could cause issues with light, draughts, and even security. If you notice that your uPVC window repair. is beginning to sag it's crucial to act fast to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window that is sliding. To do this, you'll need open the window to access the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and test it for fitting. If you are happy with the fit of your window, you can tighten screws to secure them in the right position.

If you cannot reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it could be due to the handle mechanism getting worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to shut the window and perform a test fitting. The corner joints of the sash must align with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it is important that you take action. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem is, the old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

Check that any drainage holes have no debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is related to the seal, not the frame. Again this can easily be corrected by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with ease It could be hinges at the fault. These are easily replaced by any competent DIYer and are usually completed in just a few minutes.

Like any mechanical component, hinges can wear out over time. It is an easy procedure, but it is simpler when you have a person to assist in holding the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or due to poor installation at the factory. Sending us a photo via our website will often solve the issue. We are happy to offer advice.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and near close more smoothly. It can also lower the chance of windows sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. First, the hinges because of wear and tear, may become displaced, which will cause a gap to form between the sash and the frame. If they are damaged beyond repair, it might be necessary to have them realigned. Secondly the interlock, this is on the hinge side of the window, can be misaligned. Again, it may be feasible to give them a clean but in some instances it could be necessary to have them replaced.

The next most common reason for draughts are the window seals. They can become worn down or damaged over time and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will reduce the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. They will help keep cold air out and keep your home warm and cozy!

Your upvc windows can remain a great source of insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it could be more cost-effective to replace them instead of fixing them. If you are experiencing issues with your Upvc window, it's best to consult an expert as soon as you can.